武汉亚泰达科技有限公司

主营:流量系列+液位系列+压力系列+温度系列+泵阀系列+分析仪器及耗材+其他仪器+机械密封和密封胶+进口编码器+西门子PLC+工控+变频器

武汉亚泰达科技有限公司 > 产品首页 > 胶粘剂 > 密封胶 > 大量批发英国Hylomar UB 密封胶原装正品

大量批发英国Hylomar UB 密封胶原装正品

  • 产品价格:70元/
  • 最小起订:
  • 供货总量:
  • 发货地址:湖北 武汉
  • 发布日期:2013/6/15
  • 发布公司:武汉亚泰达科技有限公司
  • 联系电话:86 027 86670150-601
    拨打电话时您可以说:您好,我在门窗幕墙网看到您发布的…
  • 联系人:曹子阳先生 QQ:1833453290 发送询价
查看收录: 查看是否已被百度收录 查看是否已被谷歌收录 查看是否已被搜狗收录 查看是否已被360收录
分享到:
大量批发英国Hylomar UB 密封胶原装正品详细信息
品牌:   型号:  
是否提供加工定制:否 基料:树脂型密封胶 硫化方法:溶剂挥发凝固型密封胶

专业销售英国德国Hylomar密封胶!

华好国际贸易(香港)有限公司代理英国Hylomar密封胶在亚洲地区业务,还可按照客户要求派遣港台等海外资深专家上门维修选型培训等服务!

联系人:曹约翰

电话:13501580528

QQ:1149651574

Skype:john5117

MSN:john5117@live.cn 

EMAIL:sz5117@126.com

本公司取得英国Hylomar公司小包装亚洲特许销售权。 

Hylomar® 密封膏是以聚氨酯为基,加有其它功能添加剂加工而成的不干性粘弹型密封膏。它具有耐水、耐水与乙二醇或水与甲醇的混合物,耐汽油、喷气燃料、矿物油与合成滑油,耐涡轮燃烧产物等性能,主要用于工作温度从-50℃~250℃的静止平面结合面密封。密封间隙应小于0.02mm。它不适合间隙大于0.02mm以上以及薄壁焊接件及冲压件结合面密封,也不适于有坡度的结合面密封。 

产品用途: 
用于活塞式发动机减速机匣与前盖、前盖与中机匣、中机匣与收集器、收集器与扩散器、扩散器与后盖以及气缸与中机匣等结合面的密封,并可用于涡轮螺旋浆发动机减速器机匣与附件机匣、附件机匣与压气机机匣、油雾分离器进出口接头结合面的密封。空-空导弹上与高压橡胶石棉垫片配合,涡轮发电机壳体与支座结合面的密封。压差信号器盖板处(氟塑料与不锈钢)的气体密封以及进气压力二通套管接头等结合面的密封。 

Non-setting gasket compound

不固化的垫片化合物

 Description描述

Hylomar Universal Blue is a polyester urethane based sealant that is non-setting and non-hardening even at high temperatures. The compound is resistant to a wide range of fluids including all industrial fuels, oils, water and brine, air, turbine and piston engine combustion products, water, water/glycol and methanol mixtures, petroleum and synthetic diester lubricating oils, gasoline and kerosene fluids (Avtur & Avcat) and fluorocarbon refrigerants. Hylomar Universal Blue can be used to seal joint faces or threaded parts.

Hylomar Universal blue是聚氨酯密封胶,在高温也下不会固化和硬化。该化合物能够抵抗各种液体,包括工业燃料、润滑油、盐、涡轮机和活塞引擎燃烧后的余留物、水、甘油和甲醇的混合物、矿物以及合成的润滑油、汽油和与煤油和冷却剂的碳氟化物等。Hylomar Universal Blue可以密封结合表面或螺纹。

 

Physical Properties物理特姓

 

Chemical Basis

Polyester Urethane

 

Temperature range

-50°C to 250°C

 

LIGHT GRADE

 

Film Thickness

0.015 mm

 

Surface Finish Max

2.0µm

 

Area covered by 100g

1.875m²

 

Product coverage after drying

2mg/cm²

 

MEDIUM GRADE

 

Film Thickness

0.03 mm

 

Surface Finish Max

3.0µm

 

Area covered by 100g

1.275m²

 


Product coverage after drying

4mg/cm²

 

 

HEAVY GRADE

 

 

Film Thickness

0.09 mm

 

Surface Finish Max

3.5µm

 

Area covered by 100g

0.56m²

 

Product coverage after drying

12mg/cm²

       

 

Instructions for use使用介绍

Hylomar Universal Blue should be applied to clean dry surfaces. Apply a thin film or bead to one or both surfaces. Once applied, sufficient time should be allowed for the solvent to evaporate. Unlimited assembly time allows precise alignment of joints to be made. Due to the nature of the compound, fasteners may be required to be re-tightened to the correct torque.

Hylomar Universal Blue必须用于清洁和干燥的表面,并涂布或滴在单面或双面上。使用时,需要有足够的时间使溶剂挥发。没有装配时间的限制,能保证精确的对位。扣件需要重新压紧,确保正确的扭矩。

 

Hylomar Universal Blue can be removed from dismantling components by rubbing with a cloth soaked with Easy Clean Solvent, Hylomar Gasket Remover or Hylomar Rally and Grand Prix Wipes. No scraping is necessary.

Hylomar Universal Blue可以用浸有溶剂的布擦拭去除,如,Hylomar垫片去除剂或Hylomar Grand Prix擦拭布。去除时不需要刮。

 

Typical Applications典型运用

Hylomar Universal Blue enables the effective sealing of metal to metal and plastic to plastic components. Typical applications include water and oil pumps, instrument inspection covers, cylinder heads and sumps, and it can also be used for the coating for pre-formed gaskets, weather proofing, motors and outdoor high voltage circuit breakers. Inlet manifolds, timing case covers, oil pump joints, gear box and transmission components or thread sealing it has also been successfully been used in the assembly of gas turbines, water cool generators and turbo vacuum systems. There is no staining of copper and silver, etc., from traces of volatiles at elevated temperature, and is therefore suitable for joints, and threads in close proximity to switch mechanisms, etc.

Hylomar Universal Blue能够有效地密封金属-金属和塑料-塑料的组件。典型的运用包括水泵和油泵、仪表检查盖、气缸盖和油底壳,同时可以涂布已成型的垫圈、户外的马达和电路保护器、进气歧管、调速器盖、油泵结合面、齿轮箱和变速箱的组件或螺纹密封。同时,它也成功地运用于汽轮机、水冷发电机和涡轮真空系统的装配。它不会受到铜或银的污染,因此,适合于机械开关装置的密封和螺纹锁固。

 

Light grade:inlet manifolds, timing case covers, oil pump joints, gearbox and transmission components, thread sealing and any finely machined surface.

低粘度:进气歧管、调速器盖、油泵的结合面、齿轮箱和变速箱的组件、螺纹密封和任何良好的机加工表面。

 

Medium grade:water and oil pumps, instrument inspection covers, cylinder heads, sumps and most machined surfaces.

中粘度:水泵和油泵、仪表的检查孔盖、气缸盖、油底壳和几乎所有的机加工表面。

 

Heavy grade:gas turbines, water cooled generators, turbo vacuum systems, gearboxes and most rough machined surfaces.

高粘度:汽轮机、水冷发电机、涡轮真空系统、齿轮箱和所有粗糙的机加工表面。

 

Handling and Safety Properties操作与安全

The compound is non-flammable

该产品不易燃。

Product contains Dichloromethane

该产品含二氯甲。

Labelling = Harmful. Carc cat 3. Phrases R40, S2, S23, S24/25 & S36/37.

标签=有毒。Carc cat 3. Phrases R40.S2, S23, S24/25 & S36/37

 

Packaging包装

Hylomar Universal Blue is available in 40 g tube, 100 g tube, 350 g cartridge, 250 ml brush top tin, 1 litre screw top tin, 5 litre screw top tin, 6.5 kg lever lid tin, 25 kg kegs and aerosols. For Technical Data on the Hylomar Universal Blue Aerosol Grade see separate Data sheet.

Hylomar Universal Blue的包装有prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags"40/支、100/支、350/桶、250/听、1/听、5/听、6.5公斤/听、25公斤/桶和气雾罐。Hylomar Universal Blue气雾级,参见不同的技术数据。

 

The shelf life of Hylomar Universal Blue is 24 months when stored in unopened original containers between 5° and 25°C.

5° - 25°C的普通环境中,在不开封的前提下,Hylomar Universal Blue的储存时间为24个月。

 

For further information please contact our sales department

需要更详细的资料,请与曹先生联系:13501580528

  • 成立时间:2011
  • 经营模式:经销批发
  • 所在地区:湖北 武汉
产品分类
产品搜索
联系方式
  • 武汉亚泰达科技有限公司
  • 联系人:曹子阳 先生
  • 手机:
  • 电话:86 027 86670150-601
  • 传真:86 027 86670150-608
  • 查看详细地址
推荐企业
最新注册会员
密封胶相关搜索推荐: 隔热密封胶条道康宁结构密封胶三和液态密封胶道康宁防水密封胶密封胶代理商双组份聚硫建筑密封胶汉高乐泰密封胶氯丁橡胶密封胶电子电器密封胶螺丝密封胶