折弯机结构说明：

1、滑块部分采用液压传动，滑块部分由滑块、油缸及机械挡块微调结构组成。左右油缸固定在机架上，通过液压使活塞（杆）带动滑块上下运动。

2、模具为高碳工具钢，强度达235N/m㎡。                  

3、同步系统  该机采用扭轴同步结构，油缸内置挡块控制，结构紧凑，性能稳定可靠，同步精度高。机械挡块由电机调节，w10计数器显示数值。

4、挡料结构  挡料采用电机传动，通过齿轮带动两丝杆同步移动。由E200数控系统控制Folds the bender structure to explain:
    1, the slide part uses the hydraulic transmission, the slide part by the slide, the cylinder and the mechanical stop piece trimming structure is composed. About the cylinder fixes on the rack, causes the piston through the hydraulic pressure (pole) to lead the slide vertical motion.
    2, the mold are the high carbon tool steel, the intensity reach 235N/m㎡.
    3, the synchronous system this machine uses turns the axis synchronization structure, the cylinder built-in stop piece control, the structure is compact, the stable property is reliable, the synchronized precision is high. The mechanical stop piece adjusts by the electrical machinery, w10 counter demonstration value.
    4, keeps off the material structure to keep off the material to use the electrical machinery transmission, leads two lead screw synchronization migration through the gear. By E200 numerical control systems control