一.DY-100保险箱指纹锁（电磁铁型）概述

     指纹锁现在作为一项成熟的技术， 已经成为第三代安全产品，打破了传统意义上的机械锁和密码锁开门的功能。它以安全（世界上没有两枚相同的指纹）、便捷（一按即开）优势很快得到消费的认可。

二.DY-100采用最新感应技术,无须再按开关上电。放上手指即可开门

三.DY-100保险箱指纹锁（电磁铁型）规格参数

1、系统无用户时，首次添加用户：

按启动键后再按添加键进入用户添加模式，添加方式为同一枚手指连续在指纹采集窗口轻按3次，当听见滴滴二声短响、蓝灯闪亮，表示一个用户添加成功，还可以继续添加，如无需再添加指纹可按启动键结束添加模式；如听见滴、滴二声长响、红灯闪亮，表示添加不成功，请重新上述操作。

系统默认前3位用户为管理员，其它为普通用户

注：管理员主要是为了确保添加新用户时，其所添加的指纹是经过管理员确认许可的。

2、系统有用户时，再次添加用户：

按启动键后再按添加键进入用户添加模式，红蓝灯均亮并闪，这时候需要管理员指纹来确认，听见滴滴二声短响、蓝灯闪亮，表示确认通过，则可以继续添加新指纹，添加指纹方法与第一节相同；听见滴、滴二声长响、红灯闪亮，表示管理员指纹确认未通过，请重新按管理员指纹，重新上述操作。

² 删除用户操作方法

按启动键后再按删除键，系统提示滴、滴、滴三声长响后滴滴，表示删除成功。

² 开门操作方法

按启动键，激活系统，此时状态灯蓝灯闪、指纹采集仪灯亮，按下手指，声音提示滴滴、指示灯蓝灯亮1秒。指纹验证通过，所有灯熄灭，电机转动、用户转动把手就可开门（某些型号是自动开门）。如果声音提示滴、滴、滴、指示灯红灯亮1秒，表示指纹验证失败，可以继续进行开门操作。连续五次指纹验证失败，需重新按启动键。

² 自锁功能

用户指纹通过后，如没有开启保险箱，保险箱再5秒钟后会重新自动上锁。

² 关门操作方法

将门推动至关闭（闭合状态）、逆时针转动把手即可关门。（部份产品门推动至关闭后自动关门）。

How to add user
1, when the system has no users, add administrator users for the first time:
Press Start button and then press the Add key to enter user to add mode, which means the same one finger fingerprint collection window at the touch of a row 3 times, when the hear the didi Two short beeps and flashing blue light, indicating a user added successfully, you can continue to add, such as the need to add fingerprint patterns can add a start button end; such as hear, di, di two-ring sound, flashing red light Liang,mean adding is not successful, the operation again.
The first 3th is administrator user , the other is the average user
Note: the administrator is to ensure that when you add new users, it added the fingerprint is recognized by the administrator permission.
2, when the system have administrator users, add average user : Press Start button and then press the Add key to enter user to add mode, and flash red and blue lights are lit, this time the need to administrator fingerprint to confirm, I heard di, di, two short beeps, blue lights flashing, that confirmed, you can continue to add new fingerprints, the fingerprint method and add the same section I;Hear the di, di two-ring sound, flashing red light, mean administrators did not pass the fingerprint recognition, re-press the Manager fingerprint, re the above operation.
²How to delete user
press start button and then press the delete key, the system prompts di, di, di After three long ring bit, said deleted successfully.
 How to open door
press  start button to activate the system, then the status light flashes blue lights, Fingerprint scanner lights, press the finger, voice prompt  di , light blue lights on for 1 second. By fingerprint verification, all the lights off, the motor rotation, the user can turn the handle to open the door (some models are automatically open the door.)
If the voice prompt  di, di, di, light red light 1 second, that the fingerprint authentication fails, you can continue to open operation. Five consecutive fingerprint authentication fails, the need to re-start button, press start.
self-locking
after the passage of the user fingerprints, if not²open the safe, safe again after 5 seconds and then automatically locked.
 How to close door
 push the door closed turn the handle counterclockwise to close. (Some products to promote to the closed door automatically closed.)