- 该型设备已通过CE认证，安全环保。
- 完全自主知识产权设计生产，已申报多项国家发明专利。
- 平置式增压泵完美的同轴度结构设计，最大限度的降低了密封件的磨损，工作时无压力差，换向压力波动值理想稳定；
- 防固化润滑筒内高速循环的润滑液可迅速带走渗漏的原料或杂质，黑料轴始终浸在润滑液中避免了结晶现象。
- 精巧的连轴件结构，使增压泵便于拆卸维护，必要时还可整体更换单边原料泵，改变原料配比。
- 气动换向控制总成，结构简单、工作可靠，使泵体部分在无电环境下仍可正常工作。
- 停机复位功能的设计应用，实现了设备的双重保护。
- 设备本身高低压双重过滤器的设置及喷灌枪自有的过滤器，实现了原料通路的三重过滤保护，减少了堵枪现象的发生。
- 加热器内采用特制的铠装式温度传感器实时采集温度信号，使加热过冲值得到了良好控制。
- 保温管路内置的鞭型铠装式温度传感器，使温度数据的采集更加灵敏准确，无信号散失。
- 保温管组采用特殊工艺缠绕专用放热铜带，加热均匀可靠，管路全封闭防水连接并外覆保温套及耐磨护套，安全耐用。
- 精准的动作计数仪方便您收工后准确计算原料的用量。
- 简洁的控制面板设置，和设备关键部位的操作提示，使您更加快捷的掌握使用。
- 主机架采用实心橡胶轮无需充气，更适合施工工地的使用。
- 整机完全人性化设计，重量轻、体积小、方便灵活，可收纳四组（90米）保温管组，单人即可实现设备移动。
- The equipment has obtained CE certification, safe and environmental protection.
- Having the proprietary property rights in design and production, several national patents have been applied and approved.
- The perfect coaxial structure design of the horizontal booster pump reduces greatly the abrasion of the sealing. There is no pressure difference during operation and the commuting pressure fluctuation value is ideal and stable.
- The lubricant inside the anti-solidifying lubricating cylinder circulates with high speed so that the leaked material and impurities could be brought away rapidly. The shaft for black material is always kept in the lubricant avoiding the crystallization.
- The delicate coupling structure is easy for the dismounting of the booster pump during the maintenance. When necessary, the complete unilateral raw material pump can be replaced to change the proportion of the raw material.
- The pneumatic commuting control assembly is simple in structure and reliable in operation, and enables the pump body operating normally during the lack of electricity.
- The design and application of the reset function when shut down realizes the dual protection.
- The dual filters of the equipment for both high and low pressure and the filter of the nozzle realize the triple filtration protection for the raw material and reduce the blocking.
- The special armoured temperature sensor inside the heater can collect the temperature signal at any time, hence the overshooting value for heating is well controlled.
- The flagelliform armoured temperature sensor inside the heating tube makes the collection of the temperature data more sensitive and accurate without signal losing.
- The heating tubes adopt special technology for winding the heating copper belt. The heating is even and reliable. The tubes are safe and durable with full closed water-proof connection, as well as the heat insulation layer and anti-abrasion layer.
- The accurate action counter makes it easy to have the knowledge of material consumption when stop working.
- The compact control panel and the operation hint of key parts make it easy for fast handling and operation.
- The equipment frame uses the solid rubber wheel dispensing with air filling which is more suitable for the construction site.
- The equipment is of humanization design with low weight, small volume. It is convenient and flexible and can contain 4 groups of heating tubes (90 meters). It can be easily shifted by one person.
主机：1台 喷枪：1把 加热保温管路1组：15米（标准配置） 最大长度（可选配）：90米 连枪短管1组：1.5米 供料泵：2支 | Main equipment: 1 set Nozzle: 1 pc Heating tube per group: 15 meter (standard) Max. length (optional): 90 meter Short tube with nozzle per group: 1.5 meter Feeding pump: 2 sets | ||||
原料配比：1：1标配固定比例(可选配变比) 原料粘度范围：200～1000CPS（操作温度下） 原料输出量：2～7.8Kg/分钟 加热温度范围：0℃～70℃ 电源：三相四线 380V 50HZ 14A×3+16A 气压源：0.5～0.8Mpa 1m3/min 单组份原料输出压力： 5～10Mpa | Proportion of raw material: 1:1 standard fixed ratio (changeable ratio can be selected) Viscosity range of raw material: 200-1000 CPS (under operation temperature) Output of raw material: 2-7.8 kg/min Heating temperature range: 0℃～70℃ Electrical source: 3 phase 4 wire, 380V 50HZ 14A×3+16A Compressed air: 0.5～0.8Mpa 1m3/min Output pressure of raw material per group: 5～10Mpa | ||||
设备外型尺寸：930mm×800mm×1210mm 运输重量 ：125Kg
| Dimension: 930mm×800mm×1210mm Weight: 125Kg |
