GT02型双组份涂胶机，其关键零部件均采用国际知名品牌，优良的品质及可靠性，辅以关键机制部件采用高强度优质不锈钢经热处理工艺精制而成，使双组份涂胶机的可靠耐用性大大提高，确保了设备的优良品质。

该涂胶机的基料泵、固化剂泵及比例泵的高压阀口均采用零泄露特殊合金研磨制造，设有独特方便的可调式配比机构，辅以两种组份的比例检测系统，最大限度地保证双组份胶近乎苛刻的配比要求，满足玻璃幕墙或中空玻璃胶的比例要求。

650

【技术参数】

设备型号                             BST03

混合比                                6:1~14:1      

基料桶                                55加仑(200L)    

固化剂桶                             5加仑(20L) 

最大耗气量                           0.8m3/min   

挤胶最大压力                         20Mpa  

供气压力                              0.5~0.8Mpa

出胶量                                4~10L/min

外型尺寸                             1100×950×2500mm

The BST03 high-efficiency adhesive dispensing machine, whose key parts are supplied by international leading brand, has a good quality and reliability. The key functional parts are made of high-tension and quality stainless steel with thermal treatment, the reliability and durability of the machine are greatly improved, ensuring a fairly well quality of machine.

The material pump, curing agent pump and proportional pump high pressure valve of the machine are made of special leakage-free alloy by grinding. The proportional pump is installed with an adjustable proportioning mechanism; the nearly fastidious proportioning requirements of the bicomponent adhesive are fulfilled, as well as those of curtain wall glass and insulating glass.

The key parts can assemble with GRACO with good quality and reliability depends on customer requirement.

Technical Parameter

Model                                BST03

Mix ratio                              6:1~14:1      

xCharging basket                         55加仑(200L)    

Curing agent basket                     5加仑(20L) 

Beat rubber quantit                      0.8m3/min   

Squeeze pressure                        20Mpa  

Air pressure                              0.5~0.8Mpa

Output                                4~10L/min

Overall dimension                      1100×950×2500mm