Z通用同步手动组角机

一、产品简介： 

这款组角机是从最早期首创的夹掌结构动力传动基础上进一步改进而来的，它解决了之前产品撞刀运行轨迹不是直线的缺点，而且各传动节点均采用绞链连接，减少了机构的间隙，所采用的动力原理更省力轻巧，是机械组角机最佳的传动形式。

二、产品结构特点：                                                                                              

1．两侧撞刀安置于滑道中直线运动，使组角结构更合理。

2．动力传动采用夹角支绞机构，使施加的外力更轻。

3．撞刀长度可以调整，使组角范围可根据材料大小而进行调整。

三、主要技术参数：

▲撞角范围：38～70系列

▲撞角高度：70mm

▲整机重量：125kg

电话：0757-81185270  13719299479  联系人：曾碧梅   QQ：342582791

邮箱：beatrice-zbm@hotmail.com

Z general synchro manual angle machine

1. Product introduction:This machine is originated from the earlier clamps power transmission structure, it has solved the shortcoming of the hit path not straight line, moreover various transmissions node is linked by gemel, this reduced the gap amount different parts, this form is the best transmission form for mechanical angle machine because the power principle is more save labour and dexterous.

2. Product characteristic:

 1. Both sides hit are placed in the slideway and move in straight line, this makes the angle structure to be more reasonable.

 2. The power transmission was adopted the angle to twist organization, it causes the external force to be lighter.

2. It can be used in a broader material scope because of its adjustable length of the hit knife.

3. Major parameter:

▲The angle scope: 38~70 series

▲The angle altitude: 70mm

▲Weight: 125kg