多玛酸性玻璃胶系采用进口原材料、美国先进生产工艺生产的一支单组份、酸性、快速固化、低模量的硅酮密封胶。使用方便、具有优异的粘接性和耐气候老化性，对多种建材有良好的粘接性能。

 使用说明 

1.表面必须清洁、干燥及不带有油污和尘埃。使用合适的溶剂如异丙醇清洁，切勿使用肥皂或洗涤剂。 

2.如要更美观的效果，打胶前用胶带遮蔽连接处两边的表面。 

3.按所需直径切开管嘴，装进打胶枪内使用。

4.立即修整密封胶，并除去遮蔽胶带（约10分钟）。

5.使用如异丙醇，丁酮或酒精等溶剂清除残留的密封胶。

DORMA glass adhesive acid imported raw materials, advanced production technology the United States produced a one-component, acid, fast cure, low modulus silicone sealant.Easy to use, has excellent adhesion and resistance to climatic aging, a variety of building materials with good adhesion.

 Help

1. The surface must be clean, dry and not with oil and dust.Use appropriate cleaning solvent such as isopropyl alcohol, do not use soap or detergent.

2. To a more beautiful effect, covered with tape before gluing both sides of the junction surface.

3. According to the required nozzle diameter, cut, put into play the use of glue guns.

4. Sealant repaired immediately and remove the masking tape (about 10 minutes).

5. Use, such as isopropyl alcohol, methyl ethyl ketone, or alcohol solvent remove residual sealant.