热熔压敏胶
主要成分：天然橡胶、合成树脂
质量标准：
外观：无色透明块状弹性固体
固含量：100%
软化点：90±5℃
熔融粘度：（170℃）/mpa.s.3600cps
纯洁度：加热至180℃、200目筛网全通过
初粘力：16＃钢球（滚球法）
持粘力：36h
180℃剥离强度∕N∕2.5cm）≥30
施工工艺：1、推荐上胶方式：喷涂或滚涂
2、操作温度155～165℃
3、胶箱或胶箱如有积碳，可先用普通石蜡或矿物油清洗再用热熔胶在135℃左右冲洗
4、本品上胶时的粘度可通过温度进行调节
5、本品不得与其他牌号热熔胶混合使用
6、往热熔胶槽加料后，应立即关闭胶槽盖子，以防外来杂质污染。
安全事项：1、操作中往热熔胶槽加料时应佩戴防护眼镜与防热手套
2、使用场所应通风良好并严禁一切明火
3、在任何时候使用温度都不能超过200℃
特点及用途：本品呈无色透明状，无臭味无毒性气味，柔软性能好、粘接力强、老化性能好、耐高温性能好、对基材适用性广等特点，适用于汽车地毯复合、车内饰粘接复合、还适用于常见粘扣带泡绵、塑料、纸、无纺布的粘接复合。
存储及运输：储存于阴凉干燥处避免阳光直射，储存温度应底于35℃并远离火源，保质期1年安排危险品运输
包装：本品20Kg纸箱包装约0.5公斤/块
Hot-melt pressure-sensitive adhesive Main components: natural rubber, synthetic resin Quality Standards: Appearance: colorless, transparent solid block flexibility Solid content: 100% Softening point: 90 ± 5 ℃ Melt viscosity: (170 ℃) / mpa.s.3600cps Purity: heated to 180 ℃, 200 mesh full by Tack: 16 # ball (ball method) Holding power: 36h 180 ℃ peel strength / N/2.5cm) ≥ 30 Construction process: 1, recommended glue method: spray or roller 2, the operating temperature of 155 ~ 165 ℃ 3, plastic boxes or plastic boxes, if carbon can be normal paraffin or mineral oil with a clean hot melt at around 135 ℃ and then washed 4, when the materials of plastic viscosity can be adjusted by temperature 5, the goods shall not be mixed with other grades of hot melt adhesive 6, after the feeding to the hot melt tank, plastic tank lid should be closed immediately to prevent foreign matter contamination. Safety matters: 1, hot melt tank to the feeding operation should wear safety glasses and heat-resistant gloves 2, using the site should be well ventilated and are prohibited from all fire 3, the temperature at any time should not exceed 200 ℃ Features and uses: This product was colorless and transparent, no smell no toxic smell, soft and good performance, strong adhesion, aging properties, high temperature performance, and wide applicability of the substrate, suitable for car carpet composite , car interior bonding compound, also applies to common Velcro foam, plastic, paper, non-woven adhesive compound. Storage and transportation: Stored in a cool dry place away from direct sunlight, storage temperature should be 35 ℃ and at the end away from the fire, one-year shelf-life arrangement of dangerous goods transport Packing: 20Kg cardboard packaging of this product about 0.5 kg / block 

 ■鸿鑫产品均通过SGS的最新欧盟REACH认证及新欧标ROHS认证。鸿鑫不仅努制造高品质的产品更在努力创建一个优秀的品牌。
■鸿鑫品争创行业标杆，所研发的产品是行业中多最先的实用型企业
■鸿鑫企业旗下的工厂有：“鸿鑫配件厂”专业生产加工机械配件、“鸿鑫机械厂”专业生产热熔胶机根据客户要求设计生产、“鸿鑫化工厂”专业研发生产热熔胶、热熔压敏胶。
我们随时欢迎并期待新的合作者成为我们的服务对象，并欢迎随时向我们提出您新的要求。希望客户代理销售我们的产品。